USB Logic Analyzer, 24MHz 8 Channel PC Data Logic Analyzer with USB Cable for UART IIC SPI MCU FPGA ARM Development Debugging

Unlock precise digital signal analysis for MCU and FPGA development with this 8-channel USB Logic Analyzer. Designed for efficient protocol debugging, including UART, IIC, and SPI, this mini USB logic analyzer connects directly to your PC for real-time data capture and analysis, ideal for solo hobbyists and small development teams alike.USB Logic Analyzer simultaneously monitors up to 8 signals with independent sampling rates, adjustable up to 24MHz per channel, allowing you to choose from 24MHz, 16MHz, 12MHz, 8MHz, 4MHz, 2MHz, 1MHz, 500KHz, 250KHz, 200KHz, 100KHz, 50KHz, and 25KHzUSB Logic Analyzer supports signal levels for 5V, 3.3V, 2.5V, and 2.0V systems (1.8V signals may work but are not recommended), 1MΩ || 10pF for minimal circuit loading and accurate measurements, integrated 24MHz crystal with ±20ppm stability for reliable pulse timingUSB Logic Analyzer analyzes and decodes common protocols such as UART, IIC, SPI, and more using compatible open-source software.USB Logic Analyzer is applicable to MCU development, FPGA and ARM system debugging, UART, SPI, IIC troubleshooting, ideal for home electronics projects and prototyping, educational use for students and electronics learners, small R&D teams verifying digital signalsNotice: No onboard capture buffer. Data is streamed directly to your PC via USB. System performance and USB speed may affect maximum achievable sampling rates, especially at full 8-channel 24MHz operationSPECIFICATIONChannels: 8Sampling Rates: Up to 24MHz per channelInput Voltage Range: -0.5V to 5.25VInput Low Voltage: -0.5V to 0.8VInput High Voltage: 2.0V to 5.25VInput Impedance: 1MΩ || 10pF (typical)Crystal Oscillator: 24MHz ±20ppmPulse Width Measurement Error: ±42ns (at 24MHz)Supported Systems: 5V, 3.3V, 2.5V, 2.0V signals (limited compatibility with 1.8V)PACKAGE1 x USB Logic Analyzer1 x USB-A to Mini USB-B Cable1 x Set of Dupont Cable Jumper Wires

• USB Logic Analyzer simultaneously monitors up to 8 signals with independent sampling rates, adjustable up to 24MHz per channel, allowing you to choose from 24MHz, 16MHz, 12MHz, 8MHz, 4MHz, 2MHz, 1MHz, 500KHz, 250KHz, 200KHz, 100KHz, 50KHz, and 25KHz
• USB Logic Analyzer supports signal levels for 5V, 3.3V, 2.5V, and 2.0V systems (1.8V signals may work but are not recommended), 1MΩ || 10pF for minimal circuit loading and accurate measurements, integrated 24MHz crystal with ±20ppm stability for reliable pulse timing
• USB Logic Analyzer analyzes and decodes common protocols such as UART, IIC, SPI, and more using compatible open-source software.
• USB Logic Analyzer is applicable to MCU development, FPGA and ARM system debugging, UART, SPI, IIC troubleshooting, ideal for home electronics projects and prototyping, educational use for students and electronics learners, small R&D teams verifying digital signals
• Notice: No onboard capture buffer. Data is streamed directly to your PC via USB. System performance and USB speed may affect maximum achievable sampling rates, especially at full 8-channel 24MHz operation